Home  /  Thermal spray  /  HVOF coating

HVOF coating

HVOF (High Velocity Oxygen Fuel) is a thermal spray process in which molten powder hits the surface at supersonic speed and forms an exceptionally dense, hard coating with outstanding adhesion. It raises resistance to wear, erosion and corrosion and is an environmentally responsible alternative to hard chrome plating. The flame reaches about 2,800 °C and particles travel at 400–800 m/s.

HVOF coating, Poland. Arranged at a vetted plant in Poland, to order, with a non-binding enquiry.

We do not carry out HVOF coating ourselves. reliq is your first point of contact — send us an enquiry and we will connect you with a proven plant in Poland, help you choose the technology and handle communication. You then sign the order, contract and warranty directly with the plant.

Heat source
Oxygen + fuel combustion
Coating
Dense, hard
Replaces
Hard chrome
Step 1
Combustion
Oxygen and fuel are ignited in the gun → a hot, very fast gas stream.
Step 2
Powder spraying
Powder is injected; molten particles hit the surface at supersonic speed.
Step 3
Finishing
The dense coating can be ground to a very high finish.

What is HVOF

HVOF (High Velocity Oxygen Fuel) is a thermal spray process in which a mixture of oxygen and fuel is ignited in the gun, creating a hot, very fast gas stream. Powder is injected into it, melts and hits the surface at supersonic speed — forming an exceptionally dense, hard coating with outstanding adhesion that can be ground to a very high finish.

What HVOF is for

HVOF increases or restores the surface properties and dimensions of parts and markedly extends their service life — raising resistance to wear, erosion and corrosion even at high temperatures and in chemically demanding environments. It is an environmentally responsible alternative to hard chrome plating.

When to choose HVOF

HVOF is the choice where the highest resistance to wear and erosion is needed — shafts, pumps, valves, pistons and parts loaded by abrasive environments. For ceramics and thermal barriers, Air Plasma Spray (APS) is more suitable; for cheaper coatings, flame spraying.

Typical parts

Thermal spray coatings are used on both new and refurbished parts, for example:

Coating materials

Depending on the operating conditions, a wide range of materials is used — carbides (high hardness and abrasion resistance), alloys and superalloys, ceramics and cermets.

Coating thickness and renovation

Depending on the technology and purpose, the coating thickness ranges from tenths of a millimetre to several millimetres. The coating can replace missing material and restore a worn part to its original dimension; on precise surfaces an allowance is left for subsequent grinding.

Industries

Engineering, power generation, mining and metallurgy, petrochemical and chemical industry, paper and printing, glass, pumps and hydraulics, electrical engineering, automotive and aerospace.

FAQ

What makes HVOF special?

The high particle velocity forms a very dense, adherent coating with outstanding resistance to wear, erosion and corrosion. It is an environmentally responsible alternative to hard chrome plating.

What materials can be applied?

Metals, alloys, carbides (e.g. tungsten carbide), ceramics and cermets.

Does reliq carry out HVOF itself?

No. reliq is an agent: we connect you with a proven plant in Poland and help you choose the technology and handle communication.

What is the typical coating thickness?

Depending on the technology, material and purpose, usually from tenths of a millimetre to several millimetres. On precise surfaces an allowance is left for subsequent grinding.

Can a worn part be repaired by thermal spraying?

Yes. The coating replaces missing material and restores the dimensions of worn surfaces — e.g. shafts, pins, bearing seats or piston rods. The surface is then machined or ground to the required dimension.

Does the coating increase the dimension, and can it be machined?

Yes, the coating adds material to the surface. For functional and precise dimensions it is ground, turned or honed after spraying; hard coatings are ground with diamond or CBN tools.

Is the coating firmly bonded to the base material?

With proper surface preparation the coating has very good adhesion. The bond is mainly mechanical, in some systems supported by a bond coat.

What should I send for a quotation?

Ideally a drawing of the part, the material, photos, a description of the operating load, the required thickness or final dimension, the roughness and the number of pieces; and whether it is a new part or a renovation.

Need an HVOF coating?

Send us a non-binding enquiry. We will connect you with a proven plant in Poland and help you choose the technology and material.

Send an enquiry →

← Back to thermal spraying