Air Plasma Spray (APS) is plasma spraying carried out in air (also atmospheric plasma spray): a plasma at up to approximately 16,000 °C melts powder — metal or ceramic — and applies it to the surface with high adhesion and minimal distortion. It handles refractory ceramics and thermal barriers.
Air Plasma Spray (APS), Poland. Arranged at a vetted plant in Poland, to order, with a non-binding enquiry.
We do not carry out Air Plasma Spray ourselves. reliq is your first point of contact — send us an enquiry and we will connect you with a proven plant in Poland, help you choose the technology and handle communication. You then sign the order, contract and warranty directly with the plant.
Air Plasma Spray (APS) is plasma spraying carried out in air. Plasma is a gas heated so high that it ionises and becomes electrically conductive; the plasma jet (up to approximately 16,000 °C) melts powder and accelerates it onto the surface. The method can apply almost any metal and refractory ceramic with high adhesion and minimal distortion of the substrate.
APS produces metallic and ceramic coatings that give corrosion and wear resistance, thermal barriers (e.g. zirconia ceramics), clearance control and thermal or electrical properties. Thanks to rapid heating and cooling, substrate distortion is minimal.
APS is ideal for ceramic coatings and thermal barriers (e.g. turbine blades, thermal insulation). For the densest, most adherent carbide coatings, HVOF is more suitable; for cheaper coatings, flame spraying.
Thermal spray coatings are used on both new and refurbished parts, for example:
Depending on the operating conditions, a wide range of materials is used — carbides (high hardness and abrasion resistance), alloys and superalloys, ceramics and cermets.
Depending on the technology and purpose, the coating thickness ranges from tenths of a millimetre to several millimetres. The coating can replace missing material and restore a worn part to its original dimension; on precise surfaces an allowance is left for subsequent grinding.
Engineering, power generation, mining and metallurgy, petrochemical and chemical industry, paper and printing, glass, pumps and hydraulics, electrical engineering, automotive and aerospace.
Because plasma spraying is carried out in air. A plasma at up to approximately 16,000 °C melts powder and applies it to the surface.
Almost any metal and refractory ceramic — from metallic to ceramic and thermal-barrier coatings.
No. reliq is an agent: we connect you with a proven plant in Poland and help you choose the technology and handle communication.
Depending on the technology, material and purpose, usually from tenths of a millimetre to several millimetres. On precise surfaces an allowance is left for subsequent grinding.
Yes. The coating replaces missing material and restores the dimensions of worn surfaces — e.g. shafts, pins, bearing seats or piston rods. The surface is then machined or ground to the required dimension.
Yes, the coating adds material to the surface. For functional and precise dimensions it is ground, turned or honed after spraying; hard coatings are ground with diamond or CBN tools.
With proper surface preparation the coating has very good adhesion. The bond is mainly mechanical, in some systems supported by a bond coat.
Ideally a drawing of the part, the material, photos, a description of the operating load, the required thickness or final dimension, the roughness and the number of pieces; and whether it is a new part or a renovation.
Send us a non-binding enquiry. We will connect you with a proven plant in Poland and help you choose the technology and material.
Send an enquiry →