Home  /  Heat treatment  /  Oil quench hardening

Oil quench hardening

Oil quench hardening is martensitic hardening in an atmosphere furnace: the part is heated to austenitising temperature and quenched in oil, gaining a hard, strong martensitic structure. Tempering follows to set the hardness-to-toughness ratio.

Oil quench hardening, Poland. Arranged at a vetted plant in Poland, to order, with a non-binding enquiry.

We do not carry out hardening ourselves. reliq is your first point of contact — send us an enquiry and we will connect you with a proven plant in Poland, help you choose the technology and handle communication. You then sign the order, contract and warranty directly with the plant.

Environment
Atmosphere furnace
Quench
Oil bath
After quench
Tempering
Step 1
Austenitising
Heating to austenitising temperature in an atmosphere furnace.
Step 2
Oil quench
Rapid cooling in an oil bath → a hard martensitic structure.
Step 3
Tempering
Sets the hardness-to-toughness ratio and reduces stress.

What is oil quench hardening

Oil quench hardening is martensitic (neutral) hardening in which the part is heated to austenitising temperature and then rapidly cooled in an oil bath. This forms a hard martensitic structure with high strength. Oil cools more gently than water, so it reduces the risk of cracking and distortion, while being more effective than gas for less hardenable steels.

Why tempering follows

Freshly quenched martensite is hard but brittle. Hardening is therefore always followed by tempering, which reduces internal stress and sets the required hardness-to-toughness ratio.

When to choose oil quench hardening

It suits carbon and alloy steels with sufficient hardenability — machine parts that need strength and hardness. For a clean, bright surface free of scale and lower distortion, consider vacuum hardening.

Oil vs. vacuum hardening

AspectOilVacuum (gas)
Environmentatmosphere furnace + oilvacuum + pressurised gas
Surfaceneeds cleaningclean, bright
Distortionhigherlower

FAQ

Why quench in oil rather than water?

Oil cools more gently than water, so there is less risk of cracking and distortion. Water quenches sharply and suits only some steels.

Must tempering follow hardening?

Yes. Quenched martensite is hard but brittle; tempering reduces stress and sets toughness.

Does reliq carry out hardening itself?

No. reliq is an agent: we connect you with a proven plant in Poland and help you choose the technology and handle communication.

Need parts hardened?

Send us a non-binding enquiry. We will connect you with a proven plant in Poland and help you choose the technology and parameters.

Send an enquiry →

← Back to heat treatment