Home  /  Heat treatment  /  Vacuum brazing

Vacuum brazing

Vacuum brazing joins parts in a vacuum furnace using a braze filler with a lower melting point, without melting the base material. The vacuum prevents oxidation, so no flux is needed and the joints are clean and strong. It suits complex assemblies and many joints at once.

Vacuum brazing, Poland. Arranged at a vetted plant in Poland, to order, with a non-binding enquiry.

We do not carry out vacuum brazing ourselves. reliq is your first point of contact — send us an enquiry and we will connect you with a proven plant in Poland, help you choose the technology and handle communication. You then sign the order, contract and warranty directly with the plant.

Environment
Vacuum furnace
Brazing temperature
1000–1200 °C
Flux
Not needed
Step 1
Preparation
Parts are cleaned and the braze filler is applied to the joints.
Step 2
Heating in vacuum
The assembly is heated uniformly in vacuum; the filler melts and flows into the joint by capillary action.
Step 3
Cooling
The filler solidifies to form a strong, clean metallurgical joint — with no flux.

What is vacuum brazing

Vacuum brazing joins parts in a vacuum furnace using a braze filler — a metal with a lower melting point than the base material. The parts are cleaned, filler is applied to the joints, the assembly is placed in the furnace, the air is evacuated and it is heated to brazing temperature. The filler melts and flows into the joint by capillary action, forming a metallurgical bond on cooling. The base materials do not melt.

Flux-free, ultra-clean joints

The vacuum prevents surface oxidation, so no flux is needed. The result is ultra-clean assemblies that need no post-braze cleaning — no flux residues and no corrosion from them. Uniform radiant heating means the whole assembly reaches brazing temperature at the same time, which limits stress and gives the joints high integrity.

Materials and fillers

Vacuum brazing uses copper-, gold- or nickel-based fillers; brazing temperatures are around 1000–1200 °C. Stainless steels and nickel alloys are commonly brazed, as well as carbon and alloy steels, and also aluminium, titanium and copper. The joint gap is critical — too wide a gap leads to shrinkage voids and brittle phases, weakening the joint.

When to choose vacuum brazing

FAQ

Why does vacuum brazing need no flux?

The vacuum removes air and prevents surface oxidation, so no flux is needed. Assemblies are ultra-clean and need no post-braze cleaning.

Does the base material melt?

No. The filler has a lower melting point and flows into the joint by capillary action; the base material stays solid.

Which materials can be brazed?

Most often stainless steels and nickel alloys, also carbon and alloy steels, and aluminium, titanium and copper. Fillers are copper-, gold- or nickel-based.

Does reliq carry out vacuum brazing itself?

No. reliq is an agent: we connect you with a proven plant in Poland and help you choose the technology and handle communication. You sign the order and warranty directly with the plant.

Need vacuum brazing?

Send us a non-binding enquiry. We will connect you with a proven plant in Poland and help you choose the technology and materials.

Send an enquiry →

← Back to heat treatment